Before you start
- Your panels arrive numbered in hanging order, with an install guide and a smoothing tool.
- The wall should be clean, dry and smooth.
- Two people make it easier on walls over 9 feet tall.
Work in order
Hang panel 1 first and work left to right. Use a level to hang the first panel straight: every panel after it follows. Panels sit side by side with no overlap.
Peel & Stick
No paste. Peel back the top of the liner, align the panel at the ceiling, and smooth it down with the smoothing tool as you pull the liner away. You can lift a corner and lay it down again while you work.
Nonwoven and Fabric
Paste the wall, not the paper. Hang the dry panel onto the wet wall and smooth it out from the center.
Trim
Every panel is printed with a small trim margin so you can align it on site. Trim the excess at the ceiling and the skirting with a sharp blade.
Need a hand?
Ask Dora, or write to us through the contact page.